tenor caller id problem
با سلام
من یک تنور axt800 دارم که برای ارتباط با pstn استفاده میشه
همه چی درست کار میکنه اما وقتی از بیرون زنگ میزنن کالر ایدی anonymouse نمایش داده میشه
اشکال از خط نیست چون قبلا dinstarداشتم و به خاطر کیفیت کم با tenor عوض کردم و تو dinstar مشکل کالر آیدی نداشتم.
کانقیگ کامل تنور رو میذارم
caller id type روی use obtained caller id هست و ۰ که اونجا نوشته یعنی گزینه اول.
line template هم به تمامی کشور ها عوض شد اما نتیجه نداد.
-AutoProvisioning-1
/*----------------
Enabled: 1 (enabled)
Status: 0 (internal use)
id: 1
TFTPServer: (Not Set) (internal use)
ProvisionLog: 9 (0x1001 log bits)
ProvisionEnable: 0 (enable,default)
ProvisionMask: 0
ProvisionErrorPolicy: 1 (min errors)
ResyncOnReset: 1 (enable,default)
ResyncRandomDelay: 15 (seconds,def 15)
ResyncPeriodic: 86400 (seconds,def 86400)
ResyncTimeOfDay: (Not Set) (in hh:mm)
ResyncErrorRetryDelay: 360 (seconds,def 360)
ConnectTimeout: 30 (seconds,def 30)
TransferTimeout: 3600 (seconds,def 3600)
ResyncAfterUpgradeAttempt: 1 (enable)
ForcedResyncDelay: 120 (seconds,def 120)
ResyncNewCallsAllowed: 0 (disable)
ProfileRuLe: (Not Set) (url of Tenor config file)
UpgradeEnable: 0 (disable)
UpgradeErrorRetryDelay: 3600 (seconds,def 3600)
UpgradeRuLe: (Not Set) (URL of new code)
UpgradeRElease: P107-09-10 (firmware version)
------------------*/
-VOIPNetwork-1
/*----------------
name: (Not Set)
AdminContact: (Not Set) (Admin contact information)
------------------*/
-SIte-1
/*----------------
name: (Not Set) (site name)
AdminContact: (Not Set) (administrator name)
------------------*/
-TimeServer-1
/*----------------
UTCOffset: 0:00 (in +/-hrs from UTC time,default)
PrimaryServerIPAddr: 192.43.244.18
SecondaryServerIPAddr: 128.138.140.44
------------------*/
-DialPlan-1
/*----------------
MAXDNlength: 30 (max DN length)
MINDNlength: 1 (min DN length)
LongDistancePrefix: (Not Set) (Numeric string)
CarrierPrefixPattern: (Not Set) (101xxxx;x is 0 to 9)
INTernationaLPrefix[1..8]: (Not Set)
IntercomEnable: 0 (No; default)
InterDigitTimeout: 4 (secs; default)
DialPlanCountry: 255 (No dial plan,default)
ProgressToneCountry: 0 (US)
AllowUnmatchedNumbers: 1 (enable)
CountryCode: (Not Set) (digits 1 to 7)
AreaCode: (Not Set) (Numeric String)
------------------*/
-UserProgramDialPlan-1
/*----------------
------------------*/
-IPDialPlan-default
/*----------------
name: (Not Set)
INcomingDelDigits: 0 (0-15: default)
OUTgoingDelDigits: 0 (0-15; default)
INcomingPrefix: (Not Set) (Numeric string)
OUTgoingPrefix: (Not Set) (Numeric string)
OUTgoingTechPrefix: (Not Set) (Numeric string)
INcomingTechPrefix[1..3]: (Not Set)
PrefixTrunkID: 0 (Diabled;Default)
------------------*/
-PRIVateNumberingPlan-1
/*----------------
PRIVateDNEnabled: 0 (No; default)
PRIVateDNLength: 3 (default length)
------------------*/
-MasterChassis-1
/*----------------
SNMPSysLocation: (Not Set) (location info for SNMP)
SNMPSysContact: (Not Set) (contact info for SNMP)
SNMPSysDescription: (Not Set) (SNMP Description)
SNMPSysName: (Not Set) (System name for SNMP)
SNMPTrapIP1: (Not Set) (SNMP Trap IP addr 1)
SNMPTrapIP2: (Not Set) (SNMP Trap IP addr 2)
SNMPTrapIP3: (Not Set) (SNMP Trap IP addr 3)
SNMPPublicCommunity: (Not Set) (id information)
SNMPTrapCommunity: trap community (id information)
------------------*/
-IVRFileServer-1
/*----------------
RequestTimeout: 5
PrimaryServerPort: 69
PrimaryServerIPAddr: 0.0.0.0
SecondaryServerPort: 69
SecondaryServerIPAddr: 0.0.0.0
------------------*/
-RemoteTenorManagerInfo-1
/*----------------
ConnectTimer: 30 (seconds)
Udp: 1 (use udp)
PrimaryServer: (Not Set) (IP address)
SecondaryServer: (Not Set) (IP address)
------------------*/
-SYSLogServer-1
/*----------------
id: 1
name: (Not Set)
SYSLogPort: 514 (Syslog Server IP port, default)
SYSLogIPAddr: 0.0.0.0
SYSLogFacility: 16 (Syslog Server facility code, de)
------------------*/
-CDRServer-1
/*----------------
id: 1
name: (Not Set)
CDRFormat: 0 (default, standard CDR)
CDRServerPort: 9002 (default)
CDRServerIPAddr: 0.0.0.0
CDRPassWord: (Not Set) (Alphanumeric String)
------------------*/
-CDRServer-2
/*----------------
id: 2
name: (Not Set)
CDRFormat: 0 (default, standard CDR)
CDRServerPort: 9003 (default)
CDRServerIPAddr: 0.0.0.0
CDRPassWord: (Not Set) (Alphanumeric String)
------------------*/
-ChannelGroup-phone
/*----------------
SignalingGroupAttached: CASSignalingGroup-phone
RoutingGroupAttached: LineCircuitRoutingGroup-phone
------------------*/
-ChannelGroup-line
/*----------------
SignalingGroupAttached: CASSignalingGroup-line
RoutingGroupAttached: TrunkCircuitRoutingGroup-line
------------------*/
-SLot-SL1
/*----------------
name: Tenor AXT800 System Controller
Registered: 1
Type: 5 (Read only, Card Type)
SlotNumber: 1 (Read only, Slot Number)
------------------*/
-DeVice-SL1DV1
/*----------------
name: System Controller Card (Read only)
DeviceType: 5 (Read only)
DeviceNumber: 1 (Read only)
------------------*/
-EthernetInterface-SL1DV1EI1
/*----------------
name: (Not Set) (name)
PortNumber: 1 (Read Only, Physical port number)
ManagementAccess: 1 (Access Enabled; Default)
DUPlex: 0 (Auto)
IPAddress: 10.20.30.3
WebServerPort: 8080 (Port Number)
SubnetMask: 255.255.255.0
ExternalNATIPAddr: 0.0.0.0
DHCPEnabled: 0 (Disabled)
PPPOEEnabled: 0 (Disabled, default)
PPPOERedialInterval: 0 (default)
PPPOEUserName: (Not Set) (user defined)
PPPOEPassword: (Not Set) (user defined)
InternalNATIPDirAttached: (unspecified)
FilterIPDirAttached[1..16]: (unspecified)
------------------*/
-StaticIPRouteDir-1
/*----------------
------------------*/
-StaticIPRoute-0
/*----------------
Gateway: 10.20.30.1
Destination: 0.0.0.0
NetMask: 0.0.0.0
Metric: 1
EIAttached: EthernetInterface-SL1DV1EI1
------------------*/
-NATIPDir-1
/*----------------
name: (Not Set)
------------------*/
-FilterIPDir-1
/*----------------
name: (Not Set)
------------------*/
-SLot-SL2
/*----------------
name: Analog FXO-8 Card
Registered: 1
Type: 16 (Read only, Card Type)
SlotNumber: 2 (Read only, Slot Number)
------------------*/
-DeVice-SL2DV1
/*----------------
name: Analog FXO Card (Read only)
DeviceType: 16 (Read only)
DeviceNumber: 1 (Read only)
------------------*/
-AnalogInterface-line
/*----------------
name: FXO analog interface (Up to 32 Chars)
Type: 1 (line)
PortNumber: 2 (read only; defines port number)
Channels: 8 (Available Channels)
IPExtension: 0 (Disabled; default)
------------------*/